Soap or Candle Image Decals/Transfers x2, Image #167086

Water based decal/transfer - two separate transfer images.

Suitable for soap or candles.

Each image measures approximately 60 mm L x 40 mm W.

Instructions for use:

Ensure the soap/candle object is clean.

Remove protective top film on decal.

Cut decal to desired shape or size.

Soak decal in warm water until the transfer film starts to uncurl or relaxes. Ensure that the backing paper does not slide off as the adhesive gum (used to stick the decal to the surface of the object) will become less efficient.

Remove the decal from the water and allow to rest for a few moments. If the decal slides around on the backing paper then it is ready to transfer. Work quickly to place the decal in position. Simply slide the decal off the backing paper onto your chosen soap/candle object.

Using a finger on the edge of the decal, hold the decal in place. Gently remove excess water and bubbles from under the decal using the sponge - work from the centre outwards. Use the cloth/paper towel to remove surface water.

Allow to dry for 4 to 8 hours.